Ranges, profiles and colours

Profiles and colours.

The LYSAGHT® roof sheeting, cladding, gutter and fascia profiles we work with in Western Australia, and the full COLORBOND® steel colour range they come in.

COLORBOND® steel colours

Twenty two colours in the standard range. Pick one to see it on a home.

A single storey home with a corrugated hip roof and a gable over the entry, its roof shown in the colour you pick

Showing the roof as built

Roof colour

M also in Matt U also in Ultra steel, for harsher coastal sites

Get a quote

Colours on screen are a guide only. Ask us for a real COLORBOND® sample before you choose.

Building near the coast?

Salt air decides the steel as much as the colour. Lysaght's minimum distances from breaking surf for roofing:

COLORBOND® steel
200 m
COLORBOND® Ultra steel
100 m
SUPERDURA® Stainless steel
0 m

Roof sheeting profiles

Corrugated, rib and pan, standing seam and nailstrip. Every one of these also runs on walls.

  • CUSTOM ORB®

    Corrugated

    Cover
    762 mm
    Rib
    16 mm
    Min pitch
    5°
    Fixing
    Screw fixed
    Use
    Roof or wall

    The original corrugated profile. CUSTOM BLUE ORB® (17 mm rib) is the match for curved work.

  • TRIMDEK®

    Rib and pan

    Cover
    762 mm
    Rib
    29 mm
    Min pitch
    2°
    Fixing
    Screw fixed
    Use
    Roof or wall

    Trapezoid ribs with a subtle peak in the pan. Clean and simple.

  • SPANDEK®

    Square corrugated

    Cover
    700 mm
    Rib
    24 mm
    Min pitch
    2°
    Fixing
    Screw fixed
    Use
    Roof or wall

    A stronger, more defined corrugation for a contemporary line.

  • KLIP-LOK CLASSIC® 700

    Rib and pan

    Cover
    700 mm
    Rib
    40 mm
    Min pitch
    1°
    Fixing
    Concealed clip
    Use
    Roof or wall

    A bold rib over wide fluted pans, with no screws through the sheet. Suits near flat roofs.

  • LONGLINE 305®

    Rib and pan

    Cover
    305 mm
    Rib
    48 mm
    Min pitch
    1°
    Fixing
    Concealed clip
    Use
    Roof or wall

    Sleek and linear. Can be made tapered for a fanned roofline. WA variant.

  • IMPERIAL™ 325 and 525

    Standing seam

    Cover
    325 or 525 mm
    Rib
    27 mm
    Min pitch
    1°
    Fixing
    Concealed clip
    Use
    Roof or wall

    Flat pans and slim seams, and it can curve.

  • ENSEAM® 265 and 465

    Nailstrip

    Cover
    265 or 465 mm
    Rib
    38 mm
    Min pitch
    3°
    Fixing
    Screw fixed
    Use
    Roof or wall

    Wide flat pans and a substantial rib, for contemporary design.

  • SNAPSEAM™ 265 and 465

    Nailstrip

    Cover
    265 or 465 mm
    Rib
    38 mm
    Min pitch
    3°
    Fixing
    Concealed clip
    Use
    Roof or wall

    The ENSEAM® look with a concealed fixing system.

Cladding profiles

CUSTOM ORB®, TRIMDEK®, SPANDEK®, KLIP-LOK CLASSIC® 700, LONGLINE 305®, IMPERIAL™, ENSEAM® and SNAPSEAM™ all run on walls too, so a roof can carry straight down the façade.

  • MINI ORB® 810

    Mini corrugated

    Cover
    810 mm
    Rib
    6 mm
    Fixing
    Screw fixed

    A fine ripple, often used as a contrast or accent wall.

  • TRIMWALL®

    Rib and pan

    Cover
    762 mm
    Rib
    29 mm
    Fixing
    Screw fixed

    A lighter TRIMDEK® made for walls only.

  • DOMINION® 285 and 485

    Interlocking panel

    Cover
    285 or 485 mm
    Rib
    22 mm
    Fixing
    Screw fixed

    Raised panels with recessed joints. Runs vertical or horizontal.

Gutter profiles

Six LYSAGHT® gutter shapes made for WA, for steel and tile roofs alike.

  • QUAD

    Quad or D

    The all rounder for new homes and replacements, on steel or tile roofs.

  • SHEERLINE®

    Square front

    A neat, streamlined square front for homes, patios and carports.

  • HALF ROUND®

    Round

    High capacity, with a curved base that keeps itself cleaner.

  • QUARTER ROUND

    Round

    A distinctive curve that suits contemporary homes.

  • RANCELINE®

    Tapered front

    Clean lines and a high rainfall capacity for modern homes.

  • COLONIAL

    Ogee

    A scalloped front edge for heritage homes and heritage style builds.

Fascia

NOVALINE® fascia system

Steel fascia that is quick to install and works with a wide range of LYSAGHT® gutters, finished with matching steel accessories.

Profile names, figures and WA availability are from Lysaght's published product guide. COLORBOND®, LYSAGHT®, ZINCALUME®, SUPERDURA® and the profile names are trade marks of BlueScope Steel Limited.

New builds · Re-roofs · Commercial

Tell us about the project.

Send through what you are building and where. Cloudbreak gets back to you to talk it through and quote the job, whatever its size or budget.

Get a quoteCall 0426 850 174
Licensed and insured
Licence no. 472664C
10 years
of hands-on industry experience behind every job
Perth
and surrounding Western Australia